google-site-verification: google575aecfcdc9dadf3.html
TondoTavoladisegno1

ETC Group S.r.l.

  www.etcgroupsrl.com

TondoTavoladisegno1
emailgrigio

commercialeetcgroup@gmail.com

+39 0721 1839937

ETC Group S.r.l.

                www.etcgroupsrl.com

Zona industriale Pirano, Tavullia

Str. Delle Campagne, 10

61010 Tavullia PU​ - ITALY


Tel. +39 0721 1839937

+39 0541 955062
+39 0541 1646150​

FAX  +39 0541 1641257


P. IVA e C. F: IT 04083110405

Reg. imp. di Pesaro  N. REA - PS – 196574

- Soot cleaning machines

- Ductless Hood​​

- Soot cleaning machines for wood-fired ovens

- Soot cleaning machines for electric ovens​

- Soot cleaning machines for charcoal grills

- Ozone generators

- Filters for kitchen hoods

- Stainless Steel Fans

- Activated carbon cleaners

- Electrostatic Filters

- Transmission boxed Aspirators

E-Mail COMPARTIMENTI

etcgroupsrl@gmail.com
informazioni.eco@gmail.com
commercialeetcgroup@gmail.com
contabilitaetcgroupsrl@gmail.com​

filterpac5001.jpeg
1665734.svg

facebook

Filterpac 500 FE

WebDesign: www.77website.com

Condensate and odor cleaner for electric ovens

busta-01

Contact us

Call Us Now

busta-01

Contact us

Call Us Now

Filterpack 500 FE is a post-water treatment anti-pollution device.
Can be used on micro particulate abatement systems. Very effective for optimal results with maximum air flow up to 500mc / h, usable on the AH250 soot cleaning machine.​

User Manual

filterpac500imgcatalogo

If more odors are to be eliminated, or if the diffusion of the steam coming out of the machine is to be attenuated, or in the case of fumes for which additional treatments are required, a post-treatment apparatus is available which is based on filtering septa. of various types, applicable at the machine outlet.

This device, due to its resistance, must necessarily be equipped with a fan and inverter.
 

The Filterpack is a filter box with 4 grooves for supporting the filters themselves. It cannot lean directly on the machine, as the outlet of the machine itself and the size of the filterpack are not the same. There is therefore a manifold, which must be connected to the exit of the machine with an array of screws.

 

A second crown of screws will tie the collector to the box. The joints must be siliconized.
Placed on top of the box, a hopper must be installed (supplied), which is also secured by screws and silicone-coated. Above all this, the fan must be fixed, through its joint d. 250 male / female.
It is advisable to fasten the fan to a fixed support (eg with suitable wall brackets) so that it does not vibrate.

 

 

NOTE:
The FILTERPACK device does not guarantee absolute filtration. In some cases, between the blast chiller and the filterpack, an opening is made, fitted with a butterfly valve, in order to let in fresh air, which contributes to the condensation of the steam.

Italy

Pre-wash and cooling of fumes with disposable water, 0.3 lit / m

 

Structure: stainless steel box, with lower settling section and filter holders; filters 50 x 50 cm.

 

Prefilter: A stainless labyrinth, for retaining coarse humidity and large dust.

 

Dust filter: Flat / mesh, for thin moisture retention and class G4 dust.

 

Anti-odor filters: 1 or 2 impregnated alumina filters 25 mm

Operating card

schedaFolterPac.jpeg

Contact us for detailed information on our products and services.